|
|
 |
|
- Traditional fixed-head walk-behind greens mowers such as the 180C, 220C, and 260C will almost always cut at a lower effective height of cut compared to newer floating-head walk-behind greens mowers.
- The C Series walk greens mowers feature a narrow front roller to rear drum distance for easy turning, maneuverability, and clean-up pass cutting performance. With a GTC installed, this distance is 13.5-in. (342 mm).
- Grass catcher system - fixed to plane of reel for maximum performance in severe undulations, the catcher is made of lightweight polyethylene material that resists corrosion and cracking, reduces vibration, and is easy to use. A narrow front roller to rear drum base increases performance in undulations, minimizing scalping opportunities and improving cut quality.
-
Integrated gear reduction yields same quality of cut regardless of operator mowing speed
-
Simple operator control design requires all controls to move forward for engagement
-
Standard operator presence system - quick release to disengage traction
-
Adjustable, loop-style handlebar for maximum comfort and control
-
Quiet/smooth 3.5 hp (2.6 kW) engine
-
Patented rubber isolators for reduced vibration
-
Dual traction rolls for straight tracking and excellent maneuverability
-
Sealed external differential provides even power distribution for drive rolls and reel
-
Gear-driven, counter-rotating rotary brush and Greens Tender™ conditioner for grain and thatch control
-
High-strength steel reels - long life, reduced maintenance, and superior toughness
-
Bedknives - a strength compromise between toughness and wear characteristics
-
Wide range of roller options, including grooved rollers, smooth rollers, and spiral rollers
-
Easily accessible bedknife-to-reel and height-of-cut adjustments
-
Greasable reel and roller bearings purge unwanted contaminants
-
Oil drain channel for clean and easy oil changes
|
| Specifications: |
| MANUFACTURER |
John Deere |
| MODEL |
260C |
| Engine |
|
| Type |
Honda, air-cooled, GX120 |
| Cycle |
4-cycle |
| Bore and stroke, in. (mm) |
2.36-in x 1.73-in (60 x 44 mm) |
| Piston displacement, cc |
118 cc |
| Compression ratio |
8:05:01 |
| Horsepower, hp (kW) |
3.5 hp (2.6 kW) - * Engine hp is provided by engine mfr. for comparison purposes only. Actual operating hp will be less. |
| Direction of rotation of output shaft |
Counterclockwise viewed from shaft side |
| Inclination limit |
Tilted up to 20 degrees in any direction |
| Idle speed at output shaft, rpm |
1,300 rpm |
| Maximum speed at output shaft, rpm |
3100 rpm |
| Fuel |
|
| Type |
Regular grade unleaded or leaded |
| Tank capacity, U.S. qt. (l) |
2.7 US qt (2.5 L) |
| Oil |
|
| Type |
SAE30 or SAE 10W-30 |
| Capacity, U.S. qt. (l) |
0.6 US qt (0.57 L) |
| Differential drive capacity, U.S. pt. (l) |
0.7 US pts (0.35 L) |
| Cutting Equipment |
|
| Cutting width |
26-in (66.0 cm) |
| Cutting height (minimum), in. (cm) |
--- |
| Standard - 3.0 mm bedknife, in. (mm) |
1/8-in (3.2 mm) - standard on 260C |
| Optional - 2.5 mm bedknife, in. (mm) |
N/A |
| Optional - 2.0 mm bedknife, in. (mm) |
N/A |
| Optional - tee bedknife, in. (mm) |
3/16-in (4.8 mm) |
| Frequency of clip standard, in. (mm) |
0.182 in (4.62 mm) 11 blade; 0.286-in (7.26 mm) 7 blade |
| Reel |
|
| Diameter, in. (mm) |
5-in (127 mm) |
| Number of blades |
7 or 11 blade |
| Material |
Heat-treated chromium molydenum steel |
| Bedknife - standard, in. (mm) |
0.118-in (3.0 mm) thick x 26-in (66.0 cm) long |
| Rotary Brush and Greens Tender Conditioner (Optional) |
|
| Brush |
Interlocked w/ reel, rotation in reverse direction; 2-3/8-in (60 mm) diameter nylon |
| Vertical cutter blades |
Specially hardened carbon tool steel; star shaped; 2-3/8-in (60 mm) diameter, 88 blades |
| Adjustable brush or cutter height, in. (mm) |
13/32-in (10 mm) below to 5/8-in (16 mm) above cut |
| Gear drive |
Gear driven from reel shaft, opposite direction of reel, rotation powers brush or vertical cutter |
| Grass Catcher |
|
| Size, lb. (kg) |
8-lb (3.7 kg) |
| Type |
Polyethylene |
| Clutches |
|
| Transport |
Belt tension |
| Reel jaw-type clutch |
On/off |
| Brush/GTC jaw-type clutch |
On/off |
| Traction drum |
Dual, aluminum, traction |
| Traveling Device |
|
| Forward speed, mph (km/h) |
5.2 mph (8.4 km/h) with transport wheels @3500 engine rpm |
| Roller (rear), in. (mm) |
Aluminum, 7.5-in (190 mm) diameter; dimpled |
| Roller (front) (grooved or smooth), in. (mm) |
Machined steel, 2-3/8-in (60 mm) diameter (for cutting height adjustment) |
| Dimensions |
|
| Length (w/tires installed), in. (mm) |
37-in (94 cm) |
| Width (w/tires installed), in. (cm) |
41.25-in (104.8 cm) |
| Height (w/tires installed), in. (cm) |
47-in (119 cm) |
| Weight (less GTCs, gear drive and transport wheel, with catcher), lb. (kg) |
235 lbs (106.8 kg) |
| Sound Levels |
|
| Operator ear |
83 dB(A) |
| Measuring standard |
ISO 11201 |
| Attachments installed |
GTCs, reels engaged |
| Certificate |
|
| Type |
ANSI B71.4-2004 |
|
Index
Map
Compact tractors
